Installation Guide For 34mm Round Poles

Contact Details

• Phone: 012 664 4825
• Email: [email protected]
• Website: www.finishingtouchessa.co.za

Installation Steps

1. Determine the height at which the pole must be installed.
2. Mark the drill holes on the wall (one hole per bracket).
3. Drill using a 5.5 mm masonry bit and insert the wall plugs provided.
4. Insert the screw so the head sits about 4 mm from the wall.
5. Mount the wall bracket onto the screw. If loose, remove and tighten the screw for a snug fit.
6. Add rings (if used) to the pole before mounting it onto the brackets.
7. Install the pole onto the brackets and secure by driving a chipboard screw through the bottom of the bracket into the pole.
8. Attach the finials by coating the dowels with wood glue and inserting into the ends of the pole.